Disclosure: This website contains affiliate links, meaning when you click the links and make a purchase, we receive a small comission with no additional costs to you.

Hallmark Industries MA0419X-12A Review


This Hallmark Industries pump is designed for industrial-grade heavy-duty, but it is also one of the best submersible well pump to be used at home. You can install this unit in wells with a diameter bigger than 5 inches. As this pump is designed as a submersible item, you don’t need to prime it. It is worth mentioning that this product comes at a very reasonable price compared to other similar units.

A plus of this device is that it has a built-in control box, which means that you don’t require an external control box. You will probably agree that it is very convenient not to use an outer control box. Another advantage of this pump is that it is made of stainless steel, and it has a heavy-duty cast iron or stainless discharge.

Yet another useful feature of this item is that it is equipped with a capacitor start motor which is intended to provide a more powerful start. The pump and the 2-wired motor are a complete set, and all you need is a pressure switch. Another benefit of the high-efficiency engine is that it is hermetically sealed. In addition to this, it is thermally protected to prevent overheating and to ensure the long life of the pump. Despite being quite powerful, the motor of this unit operates quietly.

You won’t need to buy a power cord separately, as this device comes with one which is 10 inches long. Moreover, the pump is also equipped with heavy-duty thermoplastic impellers, diffusers, and intake screens.  The impeller of this device is a patented one, and it is very efficient.  Thanks to it, the unit has a flow rate of 35 GPM. In addition to this, the water gets delivered quickly. Keep in mind that this pump doesn’t come with a wire splice kit. You can either get one separately or use the electric tape and the waterproof tape kit that comes with it.

Another thing you should know is that you will need a pressure tank and a pressure switch. Thanks to the great volume of water that it delivers per hour, the tank of the unit gets pressurized very quickly. Of course, you are not obliged to get the switch, but then you will need to turn off the electricity to the pump every time when you are finished.


Hallmark Industries MA0419X-12A Deep Well Submersible PumpBefore installing the pump, have a look at the wiring diagram, which should be on the control box cover. Since this is the so-called 2-wired model, then it should have three wires, one of which is the ground wire. You should make sure that the ground wire, which is marked with PE, is connected with the ground. The other two wires are hot.

Keep in mind that this pump is designed to be mounted vertically. If you install it upside down, the built-in check valve may stop working.


Item weight: 39 pounds

Product dimensions: 39 x 6 x 6 inches

Voltage: 220 volts

Wattage: 1500 watts

Flow rate: 35 GPM

Warranty and Service

Hallmark Industries provides a one-year warranty period from the date of purchase for the parts and labor.


  • The motor of this pump is thermally protected. This way, over-heating will be prevented, and the long life span of the whole unit is ensured.
  • As this device has a built-in control box, you won’t need to get an external one.
  • You won’t need to prime the stainless steel shell of the pump as it is designed to be a submersible product.
  • Thanks to its patented impeller, the pump has a high flow rate of 35GPM.


  • After some months of using this device, you may notice that some of its parts have been affected by corrosion.

Leave a Comment