Features
This Hallmark Industries deep well submersible pump has a number of features that make it one of the top deep well submersible pump available on the market. First of all, it is a very durable item due to the fact that it is made of stainless steel and heavy-duty cast iron. Then it is designed to be applied both in the industry field and for home-usage. Another benefit is that since it has a built-in control box, it doesn’t require an external one.
Thanks to its patented impeller, this device pumps water at a flow rate of 33 GPM. If we compare this pressure with what other similar products provide, we will see that the Hallmark Industries pump is much more powerful. Note that the unit is not equipped with a pressure switch. If you need one, you have to buy it separately. Don’t get the wrong assumption that as this device is so powerful, it is noisy. On the contrary, it operates very quietly, so even if your well is next to your house, you won’t get bothered by the noises of the pump.
One of the top features of this pump is its motor, which is a 2-wired one – so there are three wires, one of which has to connect to the ground. It is the thermal protection of the motor that prevents it from overheating. In addition to this, this engine is hermetically sealed, so it doesn’t allow the temperature to get lower, and thus it saves energy. Having said this, we can draw the conclusion that this motor is a high-efficiency one. Moreover, it has a built-in 1HP capacitor start, which is intended for a more powerful launch. The UL certification of the motor proves that it is a safe item.
Like most of the other similar units, this one also has a built-in check valve. As the pump is 4 inches, it is suitable for wells with a diameter of at least 5 inches. You don’t need to worry about priming the unit. The manufacturers have made sure that the pump can be submerged in the well without the need for priming.
Installation
The product arrives with an installation tape kit and a manual to which you can refer when you mount the unit. You can either use the included tape for wiring purposes or use a wire splice kit if you have one. It is advisable to tie the pump with a safety rope. You can do this by using the two holes on the side of the 1¼ -inch cast outlet. To ensure greater safety, it is recommended to use a stainless steel cable instead of the rope.
Specifications
Item weight: 27 pounds
Product dimensions: 31 x 6 x 6 inches
Voltage: 115 volts
Wattage: 750 watts
Flow rate: 33 GPM
Warranty and Service
Hallmark Industries provides a one-year warranty from the date of purchase. This warranty is valid for the parts and labor. So if anything happens to the components of the device during the first year, you can rely on the manufacturer’s service.
Pros
- Thanks to the materials, it is made of (stainless steel and heavy-duty cast iron) this pump is a very resilient product.
- As the motor is hermetically sealed, it saves a lot of energy. So we can conclude that it is a highly efficient product.
- A special thermal protection switch protects the unit from overheating.
- Due to its characteristics, the motor of this pump has a UL certification.
Cons
- You may notice some rust residue in the water – it comes from the steel cap, which sometimes gets affected by rust.
- At certain points, the pump may overheat and shut off.